Qs2-t car speakerphone, Quick setup guide, Rf-qs2-t
Indicator
If you purchased your Rocketfish product as new from one of the authorized retailers below, it comes with one of our standard warranties. First, use the site search capability at the top of the page to find your specific model, then navigate to the Support tab of the Product Detail.
Volume down
Power/Send/End
button
Microphone
Volume up
Visor clip
Charger
connector
QUICK SETUP GUIDE
QS2-T Car Speakerphone
RF-QS2-T
Congratulations on your purchase of the RF-QS2-T
Bluetooth Speakerphone. This speakerphone enables
comfortable, hands-free communication with a
Bluetooth-compatible phone.
Package contents
• RF-QS2-T speakerphone
• Car charger adapter
• USB charging cable
• Quick Setup Guide
Rocketfish Bluetooth Model Rf-gps31104 User Manual 2017
Features
Charging the battery
Before using your speakerphone, you must charge it
for about two hours. When the battery is fully charged,
it provides up to 11 hours of talk time and up to
480 hours of standby time.
1 USB charging: use the USB cable to plug your QS2-T
speakerphone into a computer or other USB power
port.
2 Car charging: use the car charger adapter and USB
charging cable to charge your QS2-T speakerphone
in your car.
Turning the speakerphone on
Press and hold the Power/Send/End for about
two seconds. RF-QS2-T beeps and the yellow-green
indicator light starts blinking. (First time use requires
pressing it for 4 seconds.)
Turning the speakerphone off
Press and hold the Power/Send/End for about
four seconds, RF-QS2-T beeps and the red indicator light
is displayed briefly.
Pairing the speakerphone
1 Make sure that the compatible phone is turned on
and within 33 ft. (10 m) of the speakerphone.
2 Turn on the QS2-T and make sure it’s fully charged.
Press and hold the Power/Send/End button for
about four seconds. The yellow-green indicator
flashes rapidly. Release the button. The
speakerphone is now in pairing mode.
3 Activate the Bluetooth connection from the phone.
See your phone’s documentation for more
information.
4 Set the phone to start searching for Bluetooth
devices.
5 Select
RF-QS2
from the list.
6 Enter
the
PIN
0000 to connect (or “pair”) the
speakerphone to the phone. The speakerphone
beeps once, and the indicator blinks yellow-green to
indicate the Bluetooth connection is active.
To.. Do
this..
Make a call
Press Power/Send/End.
Redial Double-press
Power/Send/End.
Answer a call
Press Power/Send/End.
End a call
Press Power/Send/End.
Refuse a call
Double-press Power/Send/End.
Change the speaker
Press the volume up button (+) to increase
volume
volume or press the volume down (-) button to
decrease.
Mute or unmute a call
Press and hold the Volume down (-) button until
a tone is heard.
Switch a call between
Press and hold Power/Send/End for
the phone and the
two seconds.
speakerphone
Voice dialing
When no call is in progress, quickly press and release
Power/Send/End. When you hear a tone, speak the
number or voice tag for the number you want to call.
(The phone must have a voice dial feature and have
recorded voice tags.)
Making a call
Turning the indicator on or off
•
Press the power and volume up buttons at the same
time for about four seconds. The indicator turns on.
Press the power and volume down buttons at the
same time for about four seconds. The indicator
turns off. You can enable or disable the indicator
when the speakerphone is connected with your
phone.
Disconnecting the speakerphone from the phone
To disconnect the speakerphone from the phone, do
one of the following:
•
Turn off the speakerphone.
•
Disconnect the RF-QS2-T in the phone’s menu.
•
Move the speakerphone more than 33 ft. (10 m)
away from the phone.
Note: You do not need to delete the pairing to
disconnect the speakerphone. When you reconnect a
paired speakerphone, you will not be asked for its PIN
again.
If you want to pair your speakerphone with new phones,
you don’t need to erase all paired device information.
There can be up to eight different paired devices
information stored.
To erase paired devices from your speakerphone:
•
When the speakerphone turned off, press and hold
the Power/Send/End and volume up (+) buttons
simultaneously for more than six seconds. A tone
plays, and the indicator flashes red and yellow-green.
The speakerphone then enters the pairing state
automatically.
Blu-Ray or
DVD Player
Game
Satellite
Remote
INPUT 3
INPUT 2
INPUT 1
OUTPUT
DC5V
DC power connector
HDMI
Output
(HDTV or projector)
HDMI Input
( Cable/satellite/DVR set-top box/Blu-ray Disc /DVD player or Game console)
Back
POWER
ON/OFF
SELECT
MODES
RF-G1185
The 'off' amount and percentage simply signifies the calculated difference between the seller-provided price for the item elsewhere and the seller's price on eBay. The price may be the seller's own price elsewhere or another seller's price. Retrak selfie stick user manual wired.
1
Oncotarget 10.18632/oncotarget.15852 Lentiviral packaging cells and reagents. https://nindatabase.netlify.app/lenti-x-lentiviral-expression-system-user-manual.html.
3
2
4
1
INP
UT 4
2
3
4
Push
Open
CR2025
To remove battery
HDMI
Output
HDMI
Input 3
HDMI Input 4
DC connector
HD TV
Projector
HDMI
Input 2
Would have been much better on the top with the other buttons. I found I fumbled around trying to find that tiny rubber button to turn on or off. Hitachi l-model w200 smart wireless speaker user manual. On the whole, I found I was disappointed with this speaker.
HDMI
Input 1
Camcorder
or
RF-G1185
4-PORT SWITCHER
QUICK SETUP GUIDE
Package contents
• 4-port HDMI Switcher
• AC power adapter
• Remote control and battery
• Quick Setup Guide
1
INPUT 4
2
3
4
Front
Power/Select
Button (top)
HDMI Input
(OPTION: Camcorder)
Power LED
Setting up your switcher
1 Using high-speed HDMI cables, such as Rocketfish brand HDMI cables, connect
one end of the HDMI cable to the HDMI port on each source devices, then
connect the other end of each cable to one of the HDMI INPUTS on your switcher
2 Connect a high-speed HDMI cable from an available input on your HDTV (or
projector) to the HDMI OUTPUT of your switcher.
3 Connect the AC power adapter to the DC power connector on your switcher,
then plug the adapter into a power outlet.
Features
• Full HD 1080p video compatibility
• Auto HDMI port switching for simple operation
• HDCP compliant to ensure playback of any content
Rocketfish Bluetooth Model Rf-gps31104 User Manual 2016
• DTS® HD, Dolby® TrueHD lossless digital audio compatibility
• One front panel HDMI input for easy connection of portable HDMI devices
• 3D video compatibility
• Gold plated connectors for maximum signal transfer and corrosion resistance
• Remote control for manual HDMI port switching when needed
• Compatibility with CEC enabled HDMI devices
In addition to the flexibility of additional HDMI inputs, this product also provides
automatic HDMI port switching. The included remote control is for manual HDMI port
switching when needed.
Using your switcher
1 Press the POWER button on the remote control or press and hold the
POWER/SELECT button on your switcher for at least two seconds. The power LED
lights red.
2 Turn on your TV or projector, then switch to the HDMI input that your switcher
is connected to. If you are uncertain how to do this, see the documentation
that came with your TV or projector.
3 Turn on the HDMI device that you want to view. The auto-switching feature of
your switcher should automatically switch to that input, and the corresponding
LED lights green. However, some HDMI source devices are not compatible with
auto-switching technology. If needed, press the number on the remote control
you want to switch to, or repeatedly press the POWER/SELECT button on your
switcher to toggle through the HDMI inputs until the correct input is selected
and the corresponding LED indicator lights green.
NOTE: If you want to watch 3D video, make sure that your TV or projector supports the
same HDMI 3D video format as your source. A 3D image cannot be delivered to a TV or
projector that does not support 3D video formats. You also need to use HDMI cables
that are compatible with 3D video, such as Rocketfish high-speed HDMI cables.
Input LEDs