Find many great new & used options and get the best deals for Chicago Electric Angle Grinder at the best online prices at eBay! Free shipping for many products! Find many great new & used options and get the best deals for Chicago Electric 120V 5 Amp 4-1/2' Angle Grinder 60372 at the best online prices at eBay! Free shipping for many products!
Page 7
For technical questions, please call 1-800-444-3353.
SKU 93179
You must install the Grinding Wheel (502) before
using your tool.
1.
Place the Backing Washer (2) on the Arbor
Spindle (7) as shown, making sure it fits tight.
2.
Place the Grinding Wheel (502) on top of the
Backing Washer (2), making sure the bore of the
Grinding Wheel fits onto the step of the Arbor
Spindle (7).
3.
Place the Disc Locking Nut (1) onto the Arbor
Spindle (7) with the concave recessed side
against the Grinding Wheel (502).
4.
Press in and hold the Spindle Lock (22). Be sure
that the Spindle Lock has engaged in the Arbor
Spindle (7) and is preventing it from turning.
5.
While holding in the Spindle Lock (22) tighten the
Disc Locking Nut (1) by turning it clockwise with
the Spanner (501). Tighten securely.
6.
Before using the tool, let it run for a minute,
checking to be sure there is no excess vibration.
If there is excess vibration, the Grinding Wheel
(502) is either not installed properly, or is
damaged. Unplug the tool, and reinstall or replace
the Grinding Wheel.
Operating Humidity Range (% RH): 5 to 90% RH, non-condensing. Perfect - the wires for the new thermostat will push right into the UWP box mounted on your wall - no need to rewire or repaint! Honeywell thermostat pro series instructions. Supply Voltage: 20 to 30 Vac. .
7.
Removing the Grinding Wheel is the reverse of
these steps.
About Power Grinders and Grinding Wheels
While an extremely useful tool, power grinders can
be dangerous if damaged or used improperly.
1.
Grinding wheels are made of aggregates of a
cutting material (grit) such as Aluminum Oxide,
an epoxy binder and usually a fabric matrix.
During manufacture, the grit portion of the wheel
is bonded to steel flanges which provide an area
to slide onto the arbor and fix in place using the
arbor nut.
2.
Grinding wheels come in dimensional sizes, speed
ranges and grit sizes.
3.
This grinder is designed to accept 9” diameter
grinding wheels, with an arbor hole diameter of
5/8”. The included adapter will allow you to use
arbor sizes of 7/8”. Do not use wheels of any other
size.
4.
This grinder has a maximum speed of 6500 RPM.
WARNING: Do not use a grinding wheel which
is not rated for at least this speed. using
lower speed rated wheels at higher speed
may cause the grinding wheel to come apart
and be ejected from the grinder at high speed,
possibly causing severe personal or property
damage.
5. Grinding wheels are identified by the material
which makes up the grit, the recommended work
piece material, and a grit number which indicates
the coarseness of the grit. Lower numbers are
more coarse. Coarse grits cut faster, but leave a
rough surface. Finer grits (higher grit numbers) cut
more slowly, but leave a more finished surface.
Select the grit which is appropriate to the job at
hand.
6.
During use, grinding wheels may become
unevenly worn, cracked or chipped. Wheels which
are damaged in this way will usually cause the
grinder to vibrate. WARNING: Damaged grinding
wheels may break apart during use, possibly
causing injury. Never use a damaged or
unevenly worn grinding wheel.
Page 6
For technical questions, please call 1-800-444-3353.
SKU 93179
Specifications
Input
120 V~, 60 Hz, 15 A
Motor Speed
6500 RPM
Power Cord
82”L x 14AWG 2 prong polarized
Construction
Molded ABS Motor Housing
Cast Aluminum Gear Housing
Wheel Diameter Samsung s3 user manual.
9” with 5/8” x 11TPI Arbor Spindle
optional 7/8” Arbor Adaptor included
Overall
Dimensions
18-1/2”L x 4-3/8”W x 5-1/2”H
unpacking
When unpacking, check to make sure that the
product is intact and undamaged.
If any parts are missing or broken, please call
Harbor Freight Tools at the number on the cover of this
manual.
Assembly
You must install the Wheel Guard (3) before using
Angle Grinder Chicago Electric 60372
your Angle Grinder
1.
Positioning the Wheel Guard (3)
tab
tab
press down,
then rotate
Align the tabs on the Wheel Guard (3) with the indents
in the underside of the Gear Housing (19) and press
the Guard into place as shown above.
2.
Tighten the Screw (5)
in the Guard Clamp (4)
Rotate the Wheel Guard (3) into position as shown
above.
3.
Tighten the Screw (5) in the Guard Clamp (4) to
hold the Wheel Guard (3) firmly in place.
You must install the Side Handle (24) before using
Chicago Electric 60372
your Angle Grinder.
1.
You can install the Side Handle (24) in either the
left or right side or the top of the Gear Housing
(19).
2.
Decide which position is best for you, providing
the firmest grip while working. Pry out the Rubber
Plug (23) which is covering the threaded hole you
have selected. Place the Rubber Plug in a safe
place where you can find it again if you need it.
3.
Installing the Side Handle (24)
NOtE: The wheel guard
is shown in the
correct final position.
Printable user manual for samsung tab s-2 download. Align the threaded end of the Side Handle (24)
with the threaded hole in the Gear Housing (19)
and screw it in clockwise until it is tight.
Chicago Electric Angle Grinder Parts
NOtE: Periodically check to be sure the handle
Chicago Electric 4.5 Angle Grinder
remains tight. Never try to reposition the Side
Handle while the tool is running.
REV 10h